Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward hug bearings
   11.4. The lobby is resistant
   11.5. Repair of a forward rack
   11.6. Lower lever of a forward suspension bracket
   11.7. Lower spherical hinge of a forward suspension bracket
   11.8. Stabilizer of cross stability of a forward suspension bracket
   11.9. Coulisse of the stabilizer of cross stability of a forward suspension bracket
   11:10. Lower frame of a forward suspension bracket
   11:11. Nave of a back wheel
   11:12. Replacement of bearings of a back nave
   11:13. Shock-absorber of a back suspension bracket
   11:14. Cylindrical spring of a back suspension bracket
   11:15. Pin of a nave of a back suspension bracket
   11:16. Lower lever of a back suspension bracket
   11:17. Top lever of a back suspension bracket
   11:18. The directing lever of a back suspension bracket
   11:19. Draft of a back suspension bracket
   11:20. Stabilizer of cross stability of a back suspension bracket
   11:21. Coulisse of the stabilizer of cross stability of a back suspension bracket
   11:22. Steering wheel
   11:23. Steering column
   11:24. Intermediate shaft of a steering column
   11:25. Ignition lock
   11:26. Steering mechanism
   11:27. Replacement of protective covers of the steering mechanism
   11:28. Removal of air from system of steering with the amplifier
   11:29. Pump of the amplifier of steering
   11:30. Spherical hinge of steering draft
   11:31. Steering draft
   11:32. Angles of installation of wheels
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

11:10. Lower frame of a forward suspension bracket

Removal

PERFORMANCE ORDER

1. Lift a forward part of the car and record on supports. Remove forward wheels.

2. Remove the scenes of the stabilizer of cross stability.

3. Unscrew a nut and a bolt of fastening of a back engine mount and the transmission. Unscrew a nut and a bolt of fastening of a suspension bracket to the lower frame. Remove a suspension bracket.

4. Unscrew a nut of fastening of the left lower spherical hinge to the lower lever and take the spherical hinge from the lever. Similarly unscrew the spherical hinge from the right lever.

5. Unscrew bolts of fastening of the steering mechanism. Exempt pipes and hoses of the steering drive with the amplifier from fastenings on the lower frame.

6. Check that all wires and hoses which fastened to the lower frame are removed from it.

7. Establish a jack with whetstone under the lower frame for deduction it at removal.

8. Unscrew 4 bolts of fastening of the lower frame, lower it down and take from under the car.

Installation

PERFORMANCE ORDER

1. Installation is made in the sequence, the return to removal.

2. Consider the next moments:
     – use new nuts of fastening of the coulisse and spherical hinged connections;
     – tighten bolts and nuts the required moment;
     – if necessary make adjustment of angles of installation of wheels.

On the homepage