Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. Suspension bracket and steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward hug bearings
   11.4. The lobby is resistant
   11.5. Repair of a forward rack
   11.6. Lower lever of a forward suspension bracket
   11.7. Lower spherical hinge of a forward suspension bracket
   11.8. Stabilizer of cross stability of a forward suspension bracket
   11.9. Coulisse of the stabilizer of cross stability of a forward suspension bracket
   11:10. Lower frame of a forward suspension bracket
   11:11. Nave of a back wheel
   11:12. Replacement of bearings of a back nave
   11:13. Shock-absorber of a back suspension bracket
   11:14. Cylindrical spring of a back suspension bracket
   11:15. Pin of a nave of a back suspension bracket
   11:16. Lower lever of a back suspension bracket
   11:17. Top lever of a back suspension bracket
   11:18. The directing lever of a back suspension bracket
   11:19. Draft of a back suspension bracket
   11:20. Stabilizer of cross stability of a back suspension bracket
   11:21. Coulisse of the stabilizer of cross stability of a back suspension bracket
   11:22. Steering wheel
   11:23. Steering column
   11:24. Intermediate shaft of a steering column
   11:25. Ignition lock
   11:26. Steering mechanism
   11:27. Replacement of protective covers of the steering mechanism
   11:28. Removal of air from system of steering with the amplifier
   11:29. Pump of the amplifier of steering
   11:30. Spherical hinge of steering draft
   11:31. Steering draft
   11:32. Angles of installation of wheels
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



11:24. Intermediate shaft of a steering column

Removal

PERFORMANCE ORDER
1. Remove a steering column.
2. Lift a forward part of the car and record on supports.
3. Apply combination tags on an intermediate shaft and a gear wheel of the steering mechanism. Unscrew a tightening nut and a bolt of fastening of an intermediate shaft. At installation use a new nut.
4. Unscrew 3 nuts fixing a sheeting of an intermediate shaft to a partition of a motor compartment.
5. From an internal part of the car shift a sheeting from an intermediate shaft and remove an intermediate shaft from the steering mechanism.

Check

PERFORMANCE ORDER
Check an intermediate shaft for wear and damages. If there is a damage of a rubber sheeting, it needs to be replaced.

Installation

PERFORMANCE ORDER
1. Combine the tags put before removal of an intermediate shaft and pull an intermediate shaft over a gear wheel of the steering mechanism.
2. Establish a rubber sheeting on an intermediate shaft on a partition of a motor compartment.
3. From under the car establish tightening a bolt of an intermediate shaft and fix it by a new nut, having tightened it the required moment.
4. Establish and tighten nuts of fastening of a sheeting.
5. Establish a steering column.

On the homepage