Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



12:14. Glasses of doors

GENERAL INFORMATION

Prevention

For repeated installation of a suspension bracket of an armrest it is necessary to use new rivets.


Removal

PERFORMANCE ORDER
1. Lower glass and remove a door upholstery.
2. Having noted an arrangement, drill heads of rivets of fastening of a suspension bracket of an armrest to a door.
3. Remove a protective film from an internal part of a door.
Glass of a forward door
4. Remove internal consolidation of glass from a door.
5. Remove the top consolidation of glass from a door.
6. Using the screw-driver as the lever release a bracket of fastening and take from it a glass window regulator guide.
7. Having inclined glass, extract it a back part from a door up.
Glass of a back door
8. Remove internal lower consolidation of glass of a back door.
9. Remove the lower external consolidation of glass.
10. Remove the top consolidation of glass.
11. Unscrew the top screw of fastening of a guide of back glass.
12. Unscrew the lower screw of fastening of a guide of back glass.
13. Remove a guide of a back part of glass from a window of a back door.
14. Press a bracket of fastening and release a window regulator guide.
15. Extract glass from a back door up.
Window regulator
16. Release a bracket of fastening of a guide of a window regulator (on a forward door for release of a bracket it is necessary to use the screw-driver) and exempt a window regulator guide from glass.
17. Put forward glass up to an emphasis and record it in this situation an adhesive tape.
18. On cars with power windows disconnect the electric socket from the window regulator engine.
19. On all models unscrew 5 nuts (are specified by shooters a photo at the left) fastenings of a window regulator and take it from a door through the lower opening at doors (a photo on the right).
Back motionless glass of a back door
20. Remove the lower internal consolidation of the lowered glass of a back door. Remove external lower consolidation of the lowered glass of a back door. Remove the top consolidation of glass of a back door.
21. Unscrew 2 screws of fastening and remove a guide of a back part of the lowered glass of a back door.
22. Remove back motionless glass with consolidation from a door.

Installation

PERFORMANCE ORDER
Installation is made in the sequence, the return to removal, taking into account the next moments:
      – all consolidations have to be correctly located in a door frame;
      – at installation of glass check that it correctly was established in a guide a window regulator;
      – check operability of a window regulator before installation of an upholstery of a door.

On the homepage