Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions

12:25. Seats

Removal and installation

PERFORMANCE ORDER

Front seats

1. Unscrew the screw of fastening of a back part of external finishing of a seat (a photo at the left) and remove finishing up (a photo on the right).
	2. Unscrew a bolt of fastening of a seat belt to the lower part of a front seat.
	3. Shift a front seat against the stop forward, unscrew screws of back fastening of a sled to a car floor.
	4. Shift a front seat against the stop back. Unscrew bolts of fastening of a forward part of a sled to a floor.
	5. Raise a seat and disconnect the electric socket from the seat belt tension mechanism. In the presence remove electric motors.
Back sitting (models with the developing back seat)
	6. Remove rubber caps (it is specified by an arrow) from racks of installation of a pillow of a seat and unscrew fastening nuts.
7. Shift a seat pillow forward and raise it to disconnect clamps of a back part of a seat. Take a pillow of a back seat from the car.
	8. For removal of side pillows unscrew a fastening bolt in the pillow basis.
	9. Take a side pillow from the car up.

10. To remove a back of a back seat on models with separate backs, remove percussion caps (are specified by shooters a photo at the left) fastenings of a forward part of a carpet of the luggage compartment to a floor and turn off a carpet for access to bolts (are specified by shooters a photo on the right) fastenings of the central part of a seat back.
11. Unscrew bolts of fastening of backs of a back seat to a body of the car and take them.
12. Installation is made in the sequence, the return to removal.

On the homepage