Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
- 2. Maintenance
   - 2.1. Petrol models
      2.1.1. Technical data
      2.1.2. Frequency of service
      - 2.1.3. Maintenance
         - 2.1.3.1. Each 15000 km or 12 months
            2.1.3.1.1. Replacement of oil and oil filter
            2.1.3.1.2. Check of level of oil in the automatic transmission
            2.1.3.1.3. Check of tightness of hoses and effluence of liquids
            2.1.3.1.4. Replacement of the filter thin air sedums in system of ventilation
            2.1.3.1.5. Coupling work check
            2.1.3.1.6. Check of a protective cover of a power shaft
            2.1.3.1.7. Steering and suspension bracket
            2.1.3.1.8. Check of the shock-absorber
         + 2.1.3.2. Each 30 000 km
         + 2.1.3.3. Each 60000 km
         + 2.1.3.4. Each 120000 km or alternate years
   + 2.2. Diesel models
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



2.1.3.1.8. Check of the shock-absorber

PERFORMANCE ORDER
1. Check the shock-absorber for any signs of liquid leaks. If leak is found, therefore, the shock-absorber is damaged and demands replacement.

Prevention

Shock-absorbers need to be changed in pairs on one axis.


2. Efficiency of the shock-absorber is also checked by pressing a corner of a body and a sharp otpuskaniye. The body has to come back to a starting position after its otpuskaniye. If the body rises above a starting position and continues to be shaken, then, possibly the shock-absorber located from this party failed and is subject to replacement. Also check fastenings of the shock-absorber that there was no wear.
On the homepage