Peugeot 406
+ 1. Maintenance instruction
- 2. Maintenance
+ 2.1. Petrol models
- 2.2. Diesel models
2.2.1. Technical data
2.2.2. Frequency of service
- 2.2.3. Maintenance
+ 2.2.3.1. Each 10000 km or 12 months
2.2.3.2. Each 20 000 km
2.2.3.3. Each 30 000 km
+ 2.2.3.4. Each 60 000 km
2.2.3.5. Each 120 000 km or 2 years
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions
2.2.3.5. Each 120 000 km or 2 years
| GENERAL INFORMATION |
The screw of removal of air on a heater hose
| The screw is specified by an arrow. |
The screw of removal of air on a bypass hose
| The screw is specified by an arrow. |
Operations on replacement of cooling liquid same, as well as at cars with petrol engines, except the following differences. Screws of removal of air from the cooling system are located in a heater hose on a partition of a motor compartment and on a bypass hose from the thermostat. The screw of removal of air can be installed also in the left top part of a radiator.
On the homepage