Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
- 6. System of ignition
   - 6.1. Systems of start and charging
      6.1.1. Accumulator
      6.1.2. System of charging
      6.1.3. Generator of alternating current
      6.1.4. System of start of the engine
      6.1.5. Starter
      6.1.6. Oil pressure sensor
      6.1.7. Oil level sensor
   + 6.2. System of ignition (petrol engines)
   + 6.3. System of prestarting heating (diesel engines)
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

6.1.6. Oil pressure sensor

Removal

PERFORMANCE ORDER

1. The sensor is located on the forward party of the block of cylinders over an oil filter.

2. Disconnect the negative plug of the accumulator.

3. Remove the protective cover closing the electric socket of the sensor, and switch-off the socket.

4. Unscrew the sensor from the block of cylinders and muffle an opening the corresponding stopper.

Installation

PERFORMANCE ORDER

1. Check consolidation of the sensor and if necessary replace.

2. Screw in the sensor in the block of cylinders and tighten the corresponding moment.

3. Connect the electric socket to the sensor.

On the homepage