Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
- 6. System of ignition
   + 6.1. Systems of start and charging
   + 6.2. System of ignition (petrol engines)
   - 6.3. System of prestarting heating (diesel engines)
      6.3.1. Technical characteristics
      6.3.2. Glow plugs
      6.3.3. Control unit of system of prestarting heating
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

6.3.3. Control unit of system of prestarting heating

GENERAL INFORMATION

Arrangement of the control unit of system of prestarting heating on the 1.9 liters engines

The block is located on the left forward side of a motor compartment on the party of a box with fuses on engines 1.9 liters and on a suspension bracket under the sensor of provision of a pedal of an accelerator on engines 2.1 liters.

Removal

PERFORMANCE ORDER

1. Disconnect the negative plug of the accumulator.
2. On the 2.1 liters engines remove the case of the air filter.
	3. Remove the socket from the block, unscrew two nuts, release fastening and remove a wire.
4. Unscrew a nut and remove the block from a motor compartment.

Installation

Installation is made in the sequence, the return to removal.

On the homepage