Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



12:13. Lock and handles of opening of a door

Removal and installation

PERFORMANCE ORDER
1. Remove a door upholstery.
2. For access to the handle of opening of a door and the lock remove a protective film from a door.
Internal handle of opening of a door

Prevention

At installation to the place of the internal handle of opening of a door it is necessary to use new rivets.


3. Cut off a protective film of a door around fastening of the internal handle.
4. Drill rivets of fastening of the handle to a door.
5. Take the handle from a door and disconnect from it drafts.
Cylinder of the lock of a forward door
6. Remove a protective film in the place opposite to the door lock. Unscrew a fastening nut. Unscrew the top screw of fastening of a protective cover of the lock of a door (a photo at the left). Unscrew the lower screws of fastening of a protective cover of the lock of a door (a photo on the right).
7. Take a protective cover of the lock from an internal part of a door.
8. For improvement of access to the cylinder of the lock release a bracket and disconnect the electric socket from the lock of opening of a door.
9. Unscrew a back nut (an arrow A on a photo at the left) fastenings of the external handle of opening of a door, take a plate of fixing of the cylinder of the lock (a photo on the right) and disconnect it from draft (an arrow B on a photo at the left).
10. For removal of the cylinder of the lock remove by means of the fastening bracket lever (a photo at the left) and separate the cylinder, the case and a plate of installation (a photo on the right).
11. Insert a key into the cylinder of the lock and take it from the case.
External handle of opening of a forward door
12. Remove the door lock cylinder.
13. Unscrew a forward nut of fastening of the external handle of opening of a door, separate draft from the handle.
14. Take the handle from a door together with rubber laying.
Lock of a forward door
15. Remove a protective film from an internal part of a door for access in the door lock.
16. Unscrew screws of fastening of a protective cover of the lock and take a cover from a door.
17. Remove the internal handle of opening of a door.
18. Disconnect the electric socket from the door lock.
19. Unscrew fastening screws (are specified by shooters a photo at the left), disconnect drafts from the lock of a door and take the lock from a door (a photo on the right). The lock of a door is not subject to repair and in case of malfunction of the lock it needs to be replaced completely.
Lock of a back door
20. Remove a protective film from an internal part of a back door.
21. Remove the internal handle of opening of a back door.

22. Disconnect draft (it is specified by an arrow) from the lock of a back door.
23. Unscrew screws (are specified by shooters) fastenings of the lock of a back door.
24. Take the lock of a back door from a door.
External handle of opening of a back door
25. Remove a protective film from an internal part of a back door.
26. Disconnect the electric socket from the lock of opening of a back door.
27. Disconnect draft from the handle of opening of a back door.
28. Remove the stopper located opposite to a nut of fastening of the handle of a back door.
29. Unscrew nuts of fastening of the handle of a back door.
30. Take the handle of opening of a back door outside.
31. Installation is made in the sequence, the return to removal.
On the homepage