Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
- 12. Body
   12.1. General information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. Front bumper
   12.7. Rear bumper
   12.8. Cowl
   12.9. Cowl lock cable
   12:10. Cowl lock
   12:11. Doors
   12:12. Door upholstery
   12:13. Lock and handles of opening of a door
   12:14. Glasses of doors
   12:15. Trunk lid
   12:16. Luggage carrier lock
   12:17. Back door
   12:18. Lock of a back door
   12:19. System of the central blocking
   12:20. Power windows
   12:21. External rear-view mirrors
   12:22. Front and back flew down
   12:23. Hatch
   12:24. Slips and emblems
   12:25. Seats
   12:26. Mechanism of a tension of a seat belt of a front seat
   12:27. Seat belts
   12:28. Finishing of salon
   12:29. Central console
   12:30. Dashboard
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



12:18. Lock of a back door

Removal and installation

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
2. Open a back door, unscrew screws and remove the internal handle of a door.
3. Using the screw-driver, remove a decorative overlay of the internal button.
4. Remove percussion caps of fastening of an upholstery of a back door.
5. Remove an internal upholstery of a back door.
Lock
6. Unscrew screws of fastening of the lock (a photo at the left), remove from the lock of draft and take the lock from a back door (a photo on the right).
Cylinder of the lock of a back door
7. Disconnect a bracket and separate draft from the lock.
8. Disconnect the electric socket from the engine of the central blocking of doors (a photo at the left), unscrew bolts and take the lock from a back door (a photo on the right).
Internal button of the lock
9. Remove the lock of a back door. Pay attention that the lock is connected to the button draft which needs to be disconnected from the lock and to take from a back door.
10. Release brackets of fastening and remove the button of the lock of a back door.
11. Installation is made in the sequence, the return to removal.
On the homepage