Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Brake system
   10.1. Technical data
   10.2. Pumping of the hydraulic brake system
   10.3. Brake pipelines and hoses
   10.4. Replacement of front brake shoes
   10.5. Replacement of back brake shoes
   10.6. Replacement of back brake shoes on drum brakes
   10.7. Forward brake disk
   10.8. Back brake disk
   10.9. Back brake drum
   10:10. Support of a forward brake
   10:11. Support of a back wheel
   10:12. Back brake cylinder
   10:13. Main brake cylinder
   10:14. Brake pedal
   10:15. Vacuum amplifier of brakes
   10:16. Unilateral valve of the vacuum amplifier of brakes
   10:17. Adjustment of the emergency brake
   10:18. Lever of the emergency brake
   10:19. Cable of the emergency brake
   10:20. Brake shoes of the emergency brake (model with disk brakes)
   10:21. The valve of adjustment of pressure in the brake system
   10:22. Stoplight switch
   10:23. Anti-blocking system of brakes (ABS)
   10:24. The vacuum pump (cars with the diesel engine)
   10:25. Check of the vacuum pump on cars with diesel engines
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



10.3. Brake pipelines and hoses

GENERAL INFORMATION

Unscrewing of a connecting nut of the brake system with use of a special key

Brake tubes are applied to transfer of brake fluid from the main brake cylinder to wheel brake cylinders. Connection of tubes with brake cylinders and distributing devices is made by conical couplings. The ends of tubes are pressed out and have the cone-shaped form for the corresponding size of conical carving openings in brake cylinders or distributing devices.

Before sinking of the ends of tubes the lock nut which after a vvinchivaniye of a cone-shaped surface in the conical basis of a carving opening presses and pressurizes a tube is put on them.

Brake hoses carry out mobile communications between mobile and motionless parts of the car. For reduction of losses of brake fluid at removal of working brake cylinders clips for a perezhatiya of brake hoses are used.

On the homepage