Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   - 3.1. Petrol engines
      3.1.1. Technical data
      3.1.2. Check of pressure of compression
      3.1.3. Installation of the mechanism of gas distribution
      3.1.4. Cover of a head of the block of cylinders
      3.1.5. Pulley of a bent shaft
      3.1.6. Casing of a gear belt
      3.1.7. Gear belt
      3.1.8. Mechanism of a tension of a gear belt and pulleys
      3.1.9. Replacement of a sealing ring of a cam-shaft
      3.1.10. Cam-shaft and pushers
      3.1.11. Check and adjustment of gaps of valves of engines 1.6 liters
      3.1.12. Head of the block of cylinders
      3.1.13. Oil pallet
      3.1.14. Oil pump
      3.1.15. Oil heater
      3.1.16. Replacement of consolidations of a bent shaft
      3.1.17. Flywheel
      3.1.18. Suspension bracket of the power unit
   + 3.2. Diesel engines
   + 3.3. Repair of the engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

3.1.16. Replacement of consolidations of a bent shaft

PERFORMANCE ORDER

Right consolidation of the crankshaft

1. Remove a pulley of the crankshaft and a gear belt of the drive. Measure consolidation installation depth.

2. Drill two small openings located in the opposite ends of consolidation in consolidation. Screw in two self-cutting screws in the drilled openings of consolidation and, using flat-nose pliers, extend a sealing ring for heads of screws.

3. Clear a consolidation nest.

4. Oil pure engine working edges of a new sealing ring and install it on the crankshaft. Working edges of a new sealing ring have to be directed inside.

5. Using the corresponding mandrel, press a sealing ring into a nest on depth equal to depth of installation of an old sealing ring.

6. Remove all traces of engine oil and establish a crankshaft pulley.

Left consolidation of the crankshaft

7. Remove a flywheel. Measure depth of installation of a sealing ring in a nest.

8. Drill two small openings located in the opposite ends of consolidation in consolidation. Screw in two self-cutting screws in the drilled openings of consolidation and, using flat-nose pliers, extend a sealing ring for heads of screws.

9. Clear a consolidation nest.

10. Oil pure engine working edges of a new sealing ring and install it on the crankshaft. Working edges of a new sealing ring have to be directed inside.

11. Using the corresponding mandrel press a sealing ring into a nest on depth equal to depth of installation of an old sealing ring.

12. Remove all traces of engine oil and establish a flywheel.

On the homepage