Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
- 8. Transmissions
+ 8.1. Mechanical transmission
- 8.2. Automatic transmission
8.2.1. Technical data
8.2.2. Replacement of oil in the transmission
8.2.3. Removal and installation of a cable of the selector
8.2.4. Removal and installation of the drive of a speedometer
8.2.5. Removal and installation of a cooler
8.2.6. Removal and installation of the multipurpose switch
8.2.7. Removal and installation of the electronic control device (ECU)
8.2.8. Removal and installation of the automatic transmission
8.2.9. Capital repairs of the automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions
8.2.1. Technical data
| GENERAL INFORMATION |
| Type |
automatic, 4 forward transfers and 1 back
|
| Designation |
4 HP 20
|
| Oil volume in the transmission: | |
| – when replacing oil |
3,0 liters
|
| – the general capacity, including the hydrotransformer |
8,3 liters
|
Moments of tightening, N · m
| Bolts of fastening of a cooler |
40
|
| Bolts of fastening of the multipurpose switch |
10
|
| Selector lever |
21
|
| Left suspension bracket of the power unit: | |
| – suspension bracket rack |
50
|
| – central nut |
65
|
| Bolts of fastening of the transmission to the engine |
60
|
| Bolts of fastening of the case of the intermediate bearing |
50
|
| Bolts of fastening of the lower frame |
85
|
| Bolts of fastening of a plate of the hydrotransformer |
30
|
| Bolts of fastening of wheels |
90
|
On the homepage