Peugeot 406

since 1996 release

Repair and operation of the car

Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical data
      8.2.2. Replacement of oil in the transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of the drive of a speedometer
      8.2.5. Removal and installation of a cooler
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of the automatic transmission
      8.2.9. Capital repairs of the automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions

8.2.6. Removal and installation of the multipurpose switch

Removal

PERFORMANCE ORDER

1. For improvement of access to the switch remove the case of the air filter and inlet channels.

2. Install the selector lever in situation "N".

3. Note position of the lever of the selector concerning the switch.

4. By means of the lever remove a cable from the selector lever on the multipurpose switch.

5. Track an electrical wiring from the switch to the socket and switch-off the socket.

6. Remove a switch electrical wiring from a support bracket on the transmission.

7. Unscrew a nut of fastening of the lever and remove the selector lever from a switch shaft.

8. Unscrew the switch and remove it from a transmission case.

Installation

Installation is made in the sequence, the return to removal.

On the homepage