Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
- 8. Transmissions
   + 8.1. Mechanical transmission
   - 8.2. Automatic transmission
      8.2.1. Technical data
      8.2.2. Replacement of oil in the transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of the drive of a speedometer
      8.2.5. Removal and installation of a cooler
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of the automatic transmission
      8.2.9. Capital repairs of the automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3 Аренда, косгу услуги экскаватора.



8.2.3. Removal and installation of a cable of the selector

PERFORMANCE ORDER
1. Remove the case of the air filter.
2. Install the selector lever in situation "P".
3. In a motor compartment remove by means of the lever spherical hinged connection of a cable from the selector lever on the multipurpose switch of the transmission.
4. Remove a bracket of fastening of a cable to an installation suspension bracket on the transmission.
5. Remove the central panel.
6. Lift a forward part of the car and record on supports.
7. Remove final system and thermofilters.
8. Disconnect a cable from all brackets of fastening.
9. In interior of the car remove illumination of the lever of the selector and sheetings. Unscrew nuts of fastening of a casing of the lever of the selector to a floor. Remove a selector lever casing together with a cable from under the car.

Removal of an automatic key of blocking of the regulator of a cable

For removal of an automatic key of blocking of the regulator (1) from a cable turn it counterclockwise and lift up.

Installation

Installation is made in the sequence, the return to removal.
On the homepage