Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Installation of the mechanism of gas distribution
      3.2.4. Cover of a head of the block of cylinders
      3.2.5. Pulley of a bent shaft
      3.2.6. Casing of a gear belt
      3.2.7. Gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. Right engine mount and mechanism of a tension of a gear belt
      3.2.10. The directing roller of a gear belt
      3.2.11. Cam-shaft and pushers
      3.2.12. Check and adjustment of gaps of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines 1.9 liters)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      + 3.2.16. Replacement of sealing rings of the crankshaft
   + 3.3. Repair of the engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



3.2.6. Casing of a gear belt

Removal

ENGINES 1.9 LITRES

PERFORMANCE ORDER
Top forward casing
1. Unscrew the screw of fastening and remove a casing from the engine.
Top back casing
2. Remove a forward casing, unscrew bolts of fastening and remove a back casing.
Lower casing
3. Remove a pulley of a bent shaft.
4. Remove both top casings.
5. Unscrew bolts of fastening and remove the lower casing.

ENGINES 2.0 LITRES

PERFORMANCE ORDER
Top casing
1. Unscrew the fastening bolt (is specified by an arrow) located in the center of a casing.
2. Turn the top connector on a quarter of a turn clockwise to remove blocking.
3. Remove the top casing from the engine.
Central casing
4. Take off an auxiliary driving belt.
5. Unscrew two bolts and remove the central casing closing a pulley of the fuel pump.
Lower casing
6. Remove a pulley of a bent shaft.
7. Remove the right suspension bracket of the power unit.
8. Remove the top central casings.
9. Unscrew bolts of fastening and remove the lower casing.

Installation

Installation is made in the sequence, the return to removal.

On the homepage