Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
+ 3. Engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
- 13. Electric equipment
   13.1. Technical data
   13.2. Detection of not closed chain
   13.3. Safety locks and relay
   13.4. Switches
   13.5. Bulbs of external lighting
   13.6. Lighting lamps of salon
   13.7. Devices of external lighting
   13.8. Adjustment of light of headlights
   13.9. Combination of devices
   13:10. Multipurpose display
   13:11. Lighter
   13:12. Hours
   13:13. Sound signal
   13:14. Screen wiper lever
   13:15. Engine of a screen wiper and draft
   13:16. Back screen wiper
   13:17. Windscreen washer
   13:18. Automobile radio tape recorder
   13:19. Column (dynamics)
   13:20. Antenna
   13:21. Control system cruise control
   13:22. Anticreeping system and immobilizer of the engine
   13:23. Electric units of forward sitting
   13:24. Safety cushion
   13:25. Safety cushion elements
   + 13:26. Electric circuits
+ 14. Main malfunctions


7f75ccd3



13.6. Lighting lamps of salon

Replacement

CARS WITH THE TOP CONSOLE

PERFORMANCE ORDER
1. By means of the screw-driver remove a plafond of illumination of a forward part of salon from the top console.
2. Take the lighting lamp of a forward part of salon, having pulled it from the boss.
3. Installation is made in the sequence, the return to removal.

CARS WITHOUT THE TOP CONSOLE

PERFORMANCE ORDER
1. Using the thin screw-driver, remove a lamp of illumination of salon from a ceiling.
2. Turn a cartridge with a bulb counterclockwise and take it from a lamp.
3. For replacement of a bulb extend it from the boss.
4. Installation is made in the sequence, the return to removal.

BULBS OF ILLUMINATION OF THE COMBINATION OF DEVICES

PERFORMANCE ORDER
1. Remove a combination of devices.
2. Turn a cartridge of a bulb counterclockwise and take from a back part of a combination of devices.
3. When replacing bulbs of illumination of a combination of devices use only bulbs of the same type and power.
4. Establish a cartridge with bulbs in a combination of devices and turn it clockwise. Install a combination of devices in the dashboard.

HEATER PANEL ILLUMINATION LAMPS


PERFORMANCE ORDER
1. Remove the heater panel from the dashboard.
2. Turn a cartridge with a bulb on or counterclockwise and remove from the control unit.
3. Take a bulb from the boss, having pulled it on themselves.
4. Installation is made in the sequence, the return to removal.

LAMP OF ILLUMINATION OF HOURS

PERFORMANCE ORDER
1. Remove hours.
2. Turn a cartridge with a bulb on 90 ° and remove it from a side part of hours.
3. Installation is made in the sequence, the return to removal.

LAMP OF ILLUMINATION OF THE MULTIPURPOSE DISPLAY

PERFORMANCE ORDER
1. Remove the multipurpose display.
2. Turn a cartridge with a bulb on 90 ° and remove from the display.
3. Installation is made in the sequence, the return to removal.

BULBS OF ILLUMINATION OF SWITCHES

Bulbs of illumination of switches in most cases are an integral part of switches and cannot be replaced separately.
On the homepage