Peugeot 406

since 1996 release

Repair and operation of the car



Peugeot 406
+ 1. Maintenance instruction
+ 2. Maintenance
- 3. Engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Installation of the mechanism of gas distribution
      3.2.4. Cover of a head of the block of cylinders
      3.2.5. Pulley of a bent shaft
      3.2.6. Casing of a gear belt
      3.2.7. Gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. Right engine mount and mechanism of a tension of a gear belt
      3.2.10. The directing roller of a gear belt
      3.2.11. Cam-shaft and pushers
      3.2.12. Check and adjustment of gaps of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines 1.9 liters)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      - 3.2.16. Replacement of sealing rings of the crankshaft
         3.2.16.1. Right sealing ring of the crankshaft
         3.2.16.2. Left sealing ring of the crankshaft
         3.2.16.3. Right sealing ring of a cam-shaft
         3.2.16.4. Left sealing ring of a cam-shaft
   + 3.3. Repair of the engine
+ 4. Cooling systems, heating and ventilation
+ 5. Fuel system
+ 6. System of ignition
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. Suspension bracket and steering
+ 12. Body
+ 13. Electric equipment
+ 14. Main malfunctions


7f75ccd3



3.2.16.3. Right sealing ring of a cam-shaft

PERFORMANCE ORDER
1. Remove a cam-shaft pulley.
2. Take a sealing ring, using the special tool. Alternatively drill two small openings in an end face of a sealing ring, screw in two self-cutting screws and flat-nose pliers for heads of screws extend a sealing ring from a nest.
3. Clear a nest of a sealing ring and the condensed cam-shaft surface.
4. Oil a new sealing ring pure engine and establish it on a cam-shaft.
5. Press a sealing ring into a nest for what use M10 bolt with the corresponding washer.
6. Establish a cam-shaft pulley.

On the homepage